VertEdge is a revolutionary edging system used to 100% fully adhere the perimeter finish of artificial grass the only product on the market to do so .This solves the problem of existing methods where edges can lift up and become a trip hazard.How to install 1 for the section covering the base of Vertedge around 100mm from the cavity bringing the dry granite mix flush with the back of Vertedge leaving the top section exposed.12. Compact the granite. More granite may need to be applied once compacted to ensure the granite is flush with the back edge of Vertedge.13. Install non woven weed membrane over the granite.14. The artificial grass is now ready to be installed.15. Lay out the artificial grass and leave to relax.16. Cut the artificial grass around 5 10mm over the finish edge fence wall etc.17. Once the artificial grass has been cut around the whole area carefully pull back the grass around 300mm away from the Vertedge.18. Using the specialist Vertedge adhesive apply a 3 5mm bead of adhesive on the exposed top section of Vertedge around the whole area.19. Once the Vertedge adhesive has been applied carefully fold back the artificial grass.20. Proceed to press the artificial grass around the perimeter ensuring good adhesive contact between Vertedge and the artificial grass backing.21. Using a bolster and a rubber mallet tuck down the artificial grass into the back edge gap between Vertedge and the perimeter finish.22. The artificial grass is now 100% fixed secure around the perimeter ready to be sand filled and brushed.